MailSlurpInboxControllerApi

All URIs are relative to https://api.mailslurp.com

MethodHTTP requestDescription
createInboxPOST /inboxesCreate an inbox email address. An inbox has a real email address and can send and receive emails. Inboxes can be either SMTP or HTTP inboxes.
createInboxRulesetPOST /inboxes/{inboxId}/rulesetsCreate an inbox ruleset
createInboxWithDefaultsPOST /inboxes/withDefaultsCreate an inbox with default options. Uses MailSlurp domain pool address and is private.
createInboxWithOptionsPOST /inboxes/withOptionsCreate an inbox with options. Extended options for inbox creation.
deleteAllInboxesDELETE /inboxesDelete all inboxes
deleteInboxDELETE /inboxes/{inboxId}Delete inbox
getAllInboxesGET /inboxes/paginatedList All Inboxes Paginated
getEmailsGET /inboxes/{inboxId}/emailsGet emails in an Inbox. This method is not idempotent as it allows retries and waits if you want certain conditions to be met before returning. For simple listing and sorting of known emails use the email controller instead.
getInboxGET /inboxes/{inboxId}Get Inbox. Returns properties of an inbox.
getInboxEmailsPaginatedGET /inboxes/{inboxId}/emails/paginatedGet inbox emails paginated
getInboxSentEmailsGET /inboxes/{inboxId}/sentGet Inbox Sent Emails
getInboxTagsGET /inboxes/tagsGet inbox tags
getInboxesGET /inboxesList Inboxes and email addresses
getOrganizationInboxesGET /inboxes/organizationList Organization Inboxes Paginated
listInboxRulesetsGET /inboxes/{inboxId}/rulesetsList inbox rulesets
listInboxTrackingPixelsGET /inboxes/{inboxId}/tracking-pixelsList inbox tracking pixels
sendEmailPOST /inboxes/{inboxId}Send Email
sendEmailAndConfirmPOST /inboxes/{inboxId}/confirmSend email and return sent confirmation
sendTestEmailPOST /inboxes/{inboxId}/send-test-emailSend a test email to inbox
setInboxFavouritedPUT /inboxes/{inboxId}/favouriteSet inbox favourited state
updateInboxPATCH /inboxes/{inboxId}Update Inbox. Change name and description. Email address is not editable.

createInbox

MailSlurpModelsInbox createInbox($allow_team_access, $description, $email_address, $expires_at, $expires_in, $favourite, $inbox_type, $name, $tags, $use_domain_pool)

Create an inbox email address. An inbox has a real email address and can send and receive emails. Inboxes can be either SMTP or HTTP inboxes.

Create a new inbox and with a randomized email address to send and receive from. Pass emailAddress parameter if you wish to use a specific email address. Creating an inbox is required before sending or receiving emails. If writing tests it is recommended that you create a new inbox during each test method so that it is unique and empty.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$allow_team_access = True; // bool | DEPRECATED (team access is always true). Grant team access to this inbox and the emails that belong to it for team members of your organization.
$description = 'description_example'; // string | Optional description of the inbox for labelling purposes. Is shown in the dashboard and can be used with
$email_address = 'email_address_example'; // string | A custom email address to use with the inbox. Defaults to null. When null MailSlurp will assign a random email address to the inbox such as `123@mailslurp.com`. If you use the `useDomainPool` option when the email address is null it will generate an email address with a more varied domain ending such as `123@mailslurp.info` or `123@mailslurp.biz`. When a custom email address is provided the address is split into a domain and the domain is queried against your user. If you have created the domain in the MailSlurp dashboard and verified it you can use any email address that ends with the domain. Note domain types must match the inbox type - so `SMTP` inboxes will only work with `SMTP` type domains. Send an email to this address and the inbox will receive and store it for you. To retrieve the email use the Inbox and Email Controller endpoints with the inbox ID.
$expires_at = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional inbox expiration date. If null then this inbox is permanent and the emails in it won't be deleted. If an expiration date is provided or is required by your plan the inbox will be closed when the expiration time is reached. Expired inboxes still contain their emails but can no longer send or receive emails. An ExpiredInboxRecord is created when an inbox and the email address and inbox ID are recorded. The expiresAt property is a timestamp string in ISO DateTime Format yyyy-MM-dd'T'HH:mm:ss.SSSXXX.
$expires_in = 56; // int | Number of milliseconds that inbox should exist for
$favourite = True; // bool | Is the inbox a favorite. Marking an inbox as a favorite is typically done in the dashboard for quick access or filtering
$inbox_type = 'inbox_type_example'; // string | HTTP (default) or SMTP inbox type. HTTP inboxes are best for testing while SMTP inboxes are more reliable for public inbound email consumption. When using custom domains the domain type must match the inbox type. HTTP inboxes are processed by AWS SES while SMTP inboxes use a custom mail server running at `mx.mailslurp.com`.
$name = 'name_example'; // string | Optional name of the inbox. Displayed in the dashboard for easier search and used as the sender name when sending emails.
$tags = array('tags_example'); // string[] | Tags that inbox has been tagged with. Tags can be added to inboxes to group different inboxes within an account. You can also search for inboxes by tag in the dashboard UI.
$use_domain_pool = True; // bool | Use the MailSlurp domain name pool with this inbox when creating the email address. Defaults to null. If enabled the inbox will be an email address with a domain randomly chosen from a list of the MailSlurp domains. This is useful when the default `@mailslurp.com` email addresses used with inboxes are blocked or considered spam by a provider or receiving service. When domain pool is enabled an email address will be generated ending in `@mailslurp.{world,info,xyz,...}` . This means a TLD is randomly selecting from a list of `.biz`, `.info`, `.xyz` etc to add variance to the generated email addresses. When null or false MailSlurp uses the default behavior of `@mailslurp.com` or custom email address provided by the emailAddress field. Note this feature is only available for `HTTP` inbox types.

try {
    $result = $apiInstance->createInbox($allow_team_access, $description, $email_address, $expires_at, $expires_in, $favourite, $inbox_type, $name, $tags, $use_domain_pool);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->createInbox: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
allow_team_accessboolDEPRECATED (team access is always true). Grant team access to this inbox and the emails that belong to it for team members of your organization.[optional]
descriptionstringOptional description of the inbox for labelling purposes. Is shown in the dashboard and can be used with[optional]
email_addressstringA custom email address to use with the inbox. Defaults to null. When null MailSlurp will assign a random email address to the inbox such as 123@mailslurp.com. If you use the useDomainPool option when the email address is null it will generate an email address with a more varied domain ending such as 123@mailslurp.info or 123@mailslurp.biz. When a custom email address is provided the address is split into a domain and the domain is queried against your user. If you have created the domain in the MailSlurp dashboard and verified it you can use any email address that ends with the domain. Note domain types must match the inbox type - so SMTP inboxes will only work with SMTP type domains. Send an email to this address and the inbox will receive and store it for you. To retrieve the email use the Inbox and Email Controller endpoints with the inbox ID.[optional]
expires_atDateTimeOptional inbox expiration date. If null then this inbox is permanent and the emails in it won’t be deleted. If an expiration date is provided or is required by your plan the inbox will be closed when the expiration time is reached. Expired inboxes still contain their emails but can no longer send or receive emails. An ExpiredInboxRecord is created when an inbox and the email address and inbox ID are recorded. The expiresAt property is a timestamp string in ISO DateTime Format yyyy-MM-dd’T’HH:mm:ss.SSSXXX.[optional]
expires_inintNumber of milliseconds that inbox should exist for[optional]
favouriteboolIs the inbox a favorite. Marking an inbox as a favorite is typically done in the dashboard for quick access or filtering[optional]
inbox_typestringHTTP (default) or SMTP inbox type. HTTP inboxes are best for testing while SMTP inboxes are more reliable for public inbound email consumption. When using custom domains the domain type must match the inbox type. HTTP inboxes are processed by AWS SES while SMTP inboxes use a custom mail server running at mx.mailslurp.com.[optional]
namestringOptional name of the inbox. Displayed in the dashboard for easier search and used as the sender name when sending emails.[optional]
tags**string[]**Tags that inbox has been tagged with. Tags can be added to inboxes to group different inboxes within an account. You can also search for inboxes by tag in the dashboard UI.[optional]
use_domain_poolboolUse the MailSlurp domain name pool with this inbox when creating the email address. Defaults to null. If enabled the inbox will be an email address with a domain randomly chosen from a list of the MailSlurp domains. This is useful when the default @mailslurp.com email addresses used with inboxes are blocked or considered spam by a provider or receiving service. When domain pool is enabled an email address will be generated ending in @mailslurp.{world,info,xyz,...} . This means a TLD is randomly selecting from a list of .biz, .info, .xyz etc to add variance to the generated email addresses. When null or false MailSlurp uses the default behavior of @mailslurp.com or custom email address provided by the emailAddress field. Note this feature is only available for HTTP inbox types.[optional]

Return type

MailSlurpModelsInbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

createInboxRuleset

MailSlurpModelsInboxRulesetDto createInboxRuleset($inbox_id, $create_inbox_ruleset_options)

Create an inbox ruleset

Create a new inbox rule for forwarding, blocking, and allowing emails when sending and receiving

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId
$create_inbox_ruleset_options = new MailSlurpModelsCreateInboxRulesetOptions(); // MailSlurpModelsCreateInboxRulesetOptions | createInboxRulesetOptions

try {
    $result = $apiInstance->createInboxRuleset($inbox_id, $create_inbox_ruleset_options);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->createInboxRuleset: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId
create_inbox_ruleset_optionsMailSlurpModelsCreateInboxRulesetOptionscreateInboxRulesetOptions

Return type

MailSlurpModelsInboxRulesetDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

createInboxWithDefaults

MailSlurpModelsInbox createInboxWithDefaults()

Create an inbox with default options. Uses MailSlurp domain pool address and is private.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);

try {
    $result = $apiInstance->createInboxWithDefaults();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->createInboxWithDefaults: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

MailSlurpModelsInbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

createInboxWithOptions

MailSlurpModelsInbox createInboxWithOptions($create_inbox_dto)

Create an inbox with options. Extended options for inbox creation.

Additional endpoint that allows inbox creation with request body options. Can be more flexible that other methods for some clients.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$create_inbox_dto = new MailSlurpModelsCreateInboxDto(); // MailSlurpModelsCreateInboxDto | createInboxDto

try {
    $result = $apiInstance->createInboxWithOptions($create_inbox_dto);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->createInboxWithOptions: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
create_inbox_dtoMailSlurpModelsCreateInboxDtocreateInboxDto

Return type

MailSlurpModelsInbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

deleteAllInboxes

deleteAllInboxes()

Delete all inboxes

Permanently delete all inboxes and associated email addresses. This will also delete all emails within the inboxes. Be careful as inboxes cannot be recovered once deleted. Note: deleting inboxes will not impact your usage limits. Monthly inbox creation limits are based on how many inboxes were created in the last 30 days, not how many inboxes you currently have.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);

try {
    $apiInstance->deleteAllInboxes();
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->deleteAllInboxes: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: Not defined

[Back to top] [Back to API list] [Back to Model list] [Back to ]

deleteInbox

deleteInbox($inbox_id)

Delete inbox

Permanently delete an inbox and associated email address as well as all emails within the given inbox. This action cannot be undone. Note: deleting an inbox will not affect your account usage. Monthly inbox usage is based on how many inboxes you create within 30 days, not how many exist at time of request.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId

try {
    $apiInstance->deleteInbox($inbox_id);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->deleteInbox: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: Not defined

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getAllInboxes

MailSlurpModelsPageInboxProjection getAllInboxes($before, $favourite, $page, $search, $since, $size, $sort, $tag, $team_access)

List All Inboxes Paginated

List inboxes in paginated form. The results are available on the content property of the returned object. This method allows for page (zero based), page size (how many results to return), and a sort direction (based on createdAt time). You Can also filter by whether an inbox is favorited or use email address pattern. This method is the recommended way to query inboxes. The alternative getInboxes method returns a full list of inboxes but is limited to 100 results.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created before given date time
$favourite = false; // bool | Optionally filter results for favourites only
$page = 0; // int | Optional page  in list pagination
$search = 'search_example'; // string | Optionally filter by search words partial matching ID, tags, name, and email address
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created after given date time
$size = 20; // int | Optional page size in list pagination
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC
$tag = 'tag_example'; // string | Optionally filter by tags. Will return inboxes that include given tags
$team_access = false; // bool | DEPRECATED. Optionally filter by team access.

try {
    $result = $apiInstance->getAllInboxes($before, $favourite, $page, $search, $since, $size, $sort, $tag, $team_access);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getAllInboxes: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
beforeDateTimeOptional filter by created before given date time[optional]
favouriteboolOptionally filter results for favourites only[optional] [default to false]
pageintOptional page in list pagination[optional] [default to 0]
searchstringOptionally filter by search words partial matching ID, tags, name, and email address[optional]
sinceDateTimeOptional filter by created after given date time[optional]
sizeintOptional page size in list pagination[optional] [default to 20]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]
tagstringOptionally filter by tags. Will return inboxes that include given tags[optional]
team_accessboolDEPRECATED. Optionally filter by team access.[optional] [default to false]

Return type

MailSlurpModelsPageInboxProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getEmails

MailSlurpModelsEmailPreview[] getEmails($inbox_id, $before, $delay_timeout, $limit, $min_count, $retry_timeout, $since, $size, $sort, $unread_only)

Get emails in an Inbox. This method is not idempotent as it allows retries and waits if you want certain conditions to be met before returning. For simple listing and sorting of known emails use the email controller instead.

List emails that an inbox has received. Only emails that are sent to the inbox’s email address will appear in the inbox. It may take several seconds for any email you send to an inbox’s email address to appear in the inbox. To make this endpoint wait for a minimum number of emails use the minCount parameter. The server will retry the inbox database until the minCount is satisfied or the retryTimeout is reached

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | Id of inbox that emails belongs to
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Exclude emails received after this ISO 8601 date time
$delay_timeout = 56; // int | delayTimeout
$limit = 56; // int | Limit the result set, ordered by received date time sort direction. Maximum 100. For more listing options see the email controller
$min_count = 56; // int | Minimum acceptable email count. Will cause request to hang (and retry) until minCount is satisfied or retryTimeout is reached.
$retry_timeout = 56; // int | Maximum milliseconds to spend retrying inbox database until minCount emails are returned
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Exclude emails received before this ISO 8601 date time
$size = 56; // int | Alias for limit. Assessed first before assessing any passed limit.
$sort = 'sort_example'; // string | Sort the results by received date and direction ASC or DESC
$unread_only = True; // bool | unreadOnly

try {
    $result = $apiInstance->getEmails($inbox_id, $before, $delay_timeout, $limit, $min_count, $retry_timeout, $since, $size, $sort, $unread_only);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getEmails: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringId of inbox that emails belongs to
beforeDateTimeExclude emails received after this ISO 8601 date time[optional]
delay_timeoutintdelayTimeout[optional]
limitintLimit the result set, ordered by received date time sort direction. Maximum 100. For more listing options see the email controller[optional]
min_countintMinimum acceptable email count. Will cause request to hang (and retry) until minCount is satisfied or retryTimeout is reached.[optional]
retry_timeoutintMaximum milliseconds to spend retrying inbox database until minCount emails are returned[optional]
sinceDateTimeExclude emails received before this ISO 8601 date time[optional]
sizeintAlias for limit. Assessed first before assessing any passed limit.[optional]
sortstringSort the results by received date and direction ASC or DESC[optional]
unread_onlyboolunreadOnly[optional]

Return type

**MailSlurpModelsEmailPreview[]**

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getInbox

MailSlurpModelsInbox getInbox($inbox_id)

Get Inbox. Returns properties of an inbox.

Returns an inbox’s properties, including its email address and ID.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId

try {
    $result = $apiInstance->getInbox($inbox_id);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getInbox: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId

Return type

MailSlurpModelsInbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getInboxEmailsPaginated

MailSlurpModelsPageEmailPreview getInboxEmailsPaginated($inbox_id, $before, $page, $since, $size, $sort)

Get inbox emails paginated

Get a paginated list of emails in an inbox. Does not hold connections open.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | Id of inbox that emails belongs to
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by received before given date time
$page = 0; // int | Optional page  in inbox emails list pagination
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by received after given date time
$size = 20; // int | Optional page size in inbox emails list pagination
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC

try {
    $result = $apiInstance->getInboxEmailsPaginated($inbox_id, $before, $page, $since, $size, $sort);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getInboxEmailsPaginated: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringId of inbox that emails belongs to
beforeDateTimeOptional filter by received before given date time[optional]
pageintOptional page in inbox emails list pagination[optional] [default to 0]
sinceDateTimeOptional filter by received after given date time[optional]
sizeintOptional page size in inbox emails list pagination[optional] [default to 20]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

MailSlurpModelsPageEmailPreview

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getInboxSentEmails

MailSlurpModelsPageSentEmailProjection getInboxSentEmails($inbox_id, $before, $page, $search_filter, $since, $size, $sort)

Get Inbox Sent Emails

Returns an inbox’s sent email receipts. Call individual sent email endpoints for more details. Note for privacy reasons the full body of sent emails is never stored. An MD5 hash hex is available for comparison instead.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by sent before given date time
$page = 0; // int | Optional page  in inbox sent email list pagination
$search_filter = 'search_filter_example'; // string | Optional sent email search
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by sent after given date time
$size = 20; // int | Optional page size in inbox sent email list pagination
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC

try {
    $result = $apiInstance->getInboxSentEmails($inbox_id, $before, $page, $search_filter, $since, $size, $sort);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getInboxSentEmails: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId
beforeDateTimeOptional filter by sent before given date time[optional]
pageintOptional page in inbox sent email list pagination[optional] [default to 0]
search_filterstringOptional sent email search[optional]
sinceDateTimeOptional filter by sent after given date time[optional]
sizeintOptional page size in inbox sent email list pagination[optional] [default to 20]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

MailSlurpModelsPageSentEmailProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getInboxTags

string[] getInboxTags()

Get inbox tags

Get all inbox tags

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);

try {
    $result = $apiInstance->getInboxTags();
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getInboxTags: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

This endpoint does not need any parameter.

Return type

string[]

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getInboxes

MailSlurpModelsInbox[] getInboxes($before, $since, $size, $sort)

List Inboxes and email addresses

List the inboxes you have created. Note use of the more advanced getAllEmails is recommended and allows paginated access using a limit and sort parameter.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created before given date time
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created after given date time
$size = 100; // int | Optional result size limit. Note an automatic limit of 100 results is applied. See the paginated `getAllEmails` for larger queries.
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC

try {
    $result = $apiInstance->getInboxes($before, $since, $size, $sort);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getInboxes: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
beforeDateTimeOptional filter by created before given date time[optional]
sinceDateTimeOptional filter by created after given date time[optional]
sizeintOptional result size limit. Note an automatic limit of 100 results is applied. See the paginated getAllEmails for larger queries.[optional] [default to 100]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

**MailSlurpModelsInbox[]**

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

getOrganizationInboxes

MailSlurpModelsPageOrganizationInboxProjection getOrganizationInboxes($before, $page, $search_filter, $since, $size, $sort)

List Organization Inboxes Paginated

List organization inboxes in paginated form. These are inboxes created with allowTeamAccess flag enabled. Organization inboxes are readOnly for non-admin users. The results are available on the content property of the returned object. This method allows for page (zero based), page size (how many results to return), and a sort direction (based on createdAt time).

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created before given date time
$page = 0; // int | Optional page  in list pagination
$search_filter = 'search_filter_example'; // string | Optional search filter
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created after given date time
$size = 20; // int | Optional page size in list pagination
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC

try {
    $result = $apiInstance->getOrganizationInboxes($before, $page, $search_filter, $since, $size, $sort);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->getOrganizationInboxes: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
beforeDateTimeOptional filter by created before given date time[optional]
pageintOptional page in list pagination[optional] [default to 0]
search_filterstringOptional search filter[optional]
sinceDateTimeOptional filter by created after given date time[optional]
sizeintOptional page size in list pagination[optional] [default to 20]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

MailSlurpModelsPageOrganizationInboxProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

listInboxRulesets

MailSlurpModelsPageInboxRulesetDto listInboxRulesets($inbox_id, $before, $page, $search_filter, $since, $size, $sort)

List inbox rulesets

List all rulesets attached to an inbox

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created before given date time
$page = 0; // int | Optional page  in inbox ruleset list pagination
$search_filter = 'search_filter_example'; // string | Optional search filter
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created after given date time
$size = 20; // int | Optional page size in inbox ruleset list pagination
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC

try {
    $result = $apiInstance->listInboxRulesets($inbox_id, $before, $page, $search_filter, $since, $size, $sort);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->listInboxRulesets: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId
beforeDateTimeOptional filter by created before given date time[optional]
pageintOptional page in inbox ruleset list pagination[optional] [default to 0]
search_filterstringOptional search filter[optional]
sinceDateTimeOptional filter by created after given date time[optional]
sizeintOptional page size in inbox ruleset list pagination[optional] [default to 20]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

MailSlurpModelsPageInboxRulesetDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

listInboxTrackingPixels

MailSlurpModelsPageTrackingPixelProjection listInboxTrackingPixels($inbox_id, $before, $page, $search_filter, $since, $size, $sort)

List inbox tracking pixels

List all tracking pixels sent from an inbox

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId
$before = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created before given date time
$page = 0; // int | Optional page  in inbox tracking pixel list pagination
$search_filter = 'search_filter_example'; // string | Optional search filter
$since = new DateTime("2013-10-20T19:20:30+01:00"); // DateTime | Optional filter by created after given date time
$size = 20; // int | Optional page size in inbox tracking pixel list pagination
$sort = 'ASC'; // string | Optional createdAt sort direction ASC or DESC

try {
    $result = $apiInstance->listInboxTrackingPixels($inbox_id, $before, $page, $search_filter, $since, $size, $sort);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->listInboxTrackingPixels: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId
beforeDateTimeOptional filter by created before given date time[optional]
pageintOptional page in inbox tracking pixel list pagination[optional] [default to 0]
search_filterstringOptional search filter[optional]
sinceDateTimeOptional filter by created after given date time[optional]
sizeintOptional page size in inbox tracking pixel list pagination[optional] [default to 20]
sortstringOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

MailSlurpModelsPageTrackingPixelProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

sendEmail

sendEmail($inbox_id, $send_email_options)

Send Email

Send an email from an inbox’s email address. The request body should contain the SendEmailOptions that include recipients, attachments, body etc. See SendEmailOptions for all available properties. Note the inboxId refers to the inbox’s id not the inbox’s email address. See https://www.mailslurp.com/guides/ for more information on how to send emails. This method does not return a sent email entity due to legacy reasons. To send and get a sent email as returned response use the sister method sendEmailAndConfirm.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | ID of the inbox you want to send the email from
$send_email_options = new MailSlurpModelsSendEmailOptions(); // MailSlurpModelsSendEmailOptions | Options for the email

try {
    $apiInstance->sendEmail($inbox_id, $send_email_options);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->sendEmail: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringID of the inbox you want to send the email from
send_email_optionsMailSlurpModelsSendEmailOptionsOptions for the email[optional]

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: Not defined

[Back to top] [Back to API list] [Back to Model list] [Back to ]

sendEmailAndConfirm

MailSlurpModelsSentEmailDto sendEmailAndConfirm($inbox_id, $send_email_options)

Send email and return sent confirmation

Sister method for standard sendEmail method with the benefit of returning a SentEmail entity confirming the successful sending of the email with a link to the sent object created for it.

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | ID of the inbox you want to send the email from
$send_email_options = new MailSlurpModelsSendEmailOptions(); // MailSlurpModelsSendEmailOptions | Options for the email

try {
    $result = $apiInstance->sendEmailAndConfirm($inbox_id, $send_email_options);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->sendEmailAndConfirm: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringID of the inbox you want to send the email from
send_email_optionsMailSlurpModelsSendEmailOptionsOptions for the email[optional]

Return type

MailSlurpModelsSentEmailDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

sendTestEmail

sendTestEmail($inbox_id)

Send a test email to inbox

Send an inbox a test email to test email receiving is working

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId

try {
    $apiInstance->sendTestEmail($inbox_id);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->sendTestEmail: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: Not defined

[Back to top] [Back to API list] [Back to Model list] [Back to ]

setInboxFavourited

MailSlurpModelsInbox setInboxFavourited($inbox_id, $set_inbox_favourited_options)

Set inbox favourited state

Set and return new favourite state for an inbox

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId
$set_inbox_favourited_options = new MailSlurpModelsSetInboxFavouritedOptions(); // MailSlurpModelsSetInboxFavouritedOptions | setInboxFavouritedOptions

try {
    $result = $apiInstance->setInboxFavourited($inbox_id, $set_inbox_favourited_options);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->setInboxFavourited: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId
set_inbox_favourited_optionsMailSlurpModelsSetInboxFavouritedOptionssetInboxFavouritedOptions

Return type

MailSlurpModelsInbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]

updateInbox

MailSlurpModelsInbox updateInbox($inbox_id, $update_inbox_options)

Update Inbox. Change name and description. Email address is not editable.

Update editable fields on an inbox

Example

<?php
require_once(__DIR__ . '/vendor/autoload.php');


// Configure API key authorization: API_KEY
$config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKey('x-api-key', 'YOUR_API_KEY');
// Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
// $config = MailSlurpConfiguration::getDefaultConfiguration()->setApiKeyPrefix('x-api-key', 'Bearer');


$apiInstance = new MailSlurpApiInboxControllerApi(
    // If you want use custom http client, pass your client which implements `GuzzleHttpClientInterface`.
    // This is optional, `GuzzleHttpClient` will be used as default.
    new GuzzleHttpClient(),
    $config
);
$inbox_id = 'inbox_id_example'; // string | inboxId
$update_inbox_options = new MailSlurpModelsUpdateInboxOptions(); // MailSlurpModelsUpdateInboxOptions | updateInboxOptions

try {
    $result = $apiInstance->updateInbox($inbox_id, $update_inbox_options);
    print_r($result);
} catch (Exception $e) {
    echo 'Exception when calling InboxControllerApi->updateInbox: ', $e->getMessage(), PHP_EOL;
}
?>

Parameters

NameTypeDescriptionNotes
inbox_idstringinboxId
update_inbox_optionsMailSlurpModelsUpdateInboxOptionsupdateInboxOptions

Return type

MailSlurpModelsInbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

[Back to top] [Back to API list] [Back to Model list] [Back to ]