mailslurp_client.InboxControllerApi

All URIs are relative to https://api.mailslurp.com

MethodHTTP requestDescription
create_inboxPOST /inboxesCreate an inbox email address. An inbox has a real email address and can send and receive emails. Inboxes can be either SMTP or HTTP inboxes.
create_inbox_rulesetPOST /inboxes/{inboxId}/rulesetsCreate an inbox ruleset
create_inbox_with_defaultsPOST /inboxes/withDefaultsCreate an inbox with default options. Uses MailSlurp domain pool address and is private.
create_inbox_with_optionsPOST /inboxes/withOptionsCreate an inbox with options. Extended options for inbox creation.
delete_all_inboxesDELETE /inboxesDelete all inboxes
delete_inboxDELETE /inboxes/{inboxId}Delete inbox
does_inbox_existGET /inboxes/existsDoes inbox exist
flush_expiredDELETE /inboxes/expiredRemove expired inboxes
get_all_inboxesGET /inboxes/paginatedList All Inboxes Paginated
get_emailsGET /inboxes/{inboxId}/emailsGet emails in an Inbox. This method is not idempotent as it allows retries and waits if you want certain conditions to be met before returning. For simple listing and sorting of known emails use the email controller instead.
get_inboxGET /inboxes/{inboxId}Get Inbox. Returns properties of an inbox.
get_inbox_countGET /inboxes/countGet total inbox count
get_inbox_email_countGET /inboxes/{inboxId}/emails/countGet email count in inbox
get_inbox_emails_paginatedGET /inboxes/{inboxId}/emails/paginatedGet inbox emails paginated
get_inbox_sent_emailsGET /inboxes/{inboxId}/sentGet Inbox Sent Emails
get_inbox_tagsGET /inboxes/tagsGet inbox tags
get_inboxesGET /inboxesList Inboxes and email addresses
get_organization_inboxesGET /inboxes/organizationList Organization Inboxes Paginated
list_inbox_rulesetsGET /inboxes/{inboxId}/rulesetsList inbox rulesets
list_inbox_tracking_pixelsGET /inboxes/{inboxId}/tracking-pixelsList inbox tracking pixels
send_emailPOST /inboxes/{inboxId}Send Email
send_email_and_confirmPOST /inboxes/{inboxId}/confirmSend email and return sent confirmation
send_test_emailPOST /inboxes/{inboxId}/send-test-emailSend a test email to inbox
set_inbox_favouritedPUT /inboxes/{inboxId}/favouriteSet inbox favourited state
update_inboxPATCH /inboxes/{inboxId}Update Inbox. Change name and description. Email address is not editable.

create_inbox

Inbox create_inbox(allow_team_access=allow_team_access, description=description, email_address=email_address, expires_at=expires_at, expires_in=expires_in, favourite=favourite, inbox_type=inbox_type, name=name, tags=tags, use_domain_pool=use_domain_pool)

Create an inbox email address. An inbox has a real email address and can send and receive emails. Inboxes can be either SMTP or HTTP inboxes.

Create a new inbox and with a randomized email address to send and receive from. Pass emailAddress parameter if you wish to use a specific email address. Creating an inbox is required before sending or receiving emails. If writing tests it is recommended that you create a new inbox during each test method so that it is unique and empty.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    allow_team_access = True # bool | DEPRECATED (team access is always true). Grant team access to this inbox and the emails that belong to it for team members of your organization. (optional)
description = 'description_example' # str | Optional description of the inbox for labelling purposes. Is shown in the dashboard and can be used with (optional)
email_address = 'email_address_example' # str | A custom email address to use with the inbox. Defaults to null. When null MailSlurp will assign a random email address to the inbox such as `123@mailslurp.com`. If you use the `useDomainPool` option when the email address is null it will generate an email address with a more varied domain ending such as `123@mailslurp.info` or `123@mailslurp.biz`. When a custom email address is provided the address is split into a domain and the domain is queried against your user. If you have created the domain in the MailSlurp dashboard and verified it you can use any email address that ends with the domain. Note domain types must match the inbox type - so `SMTP` inboxes will only work with `SMTP` type domains. Avoid `SMTP` inboxes if you need to send emails as they can only receive. Send an email to this address and the inbox will receive and store it for you. To retrieve the email use the Inbox and Email Controller endpoints with the inbox ID. (optional)
expires_at = '2013-10-20T19:20:30+01:00' # datetime | Optional inbox expiration date. If null then this inbox is permanent and the emails in it won't be deleted. If an expiration date is provided or is required by your plan the inbox will be closed when the expiration time is reached. Expired inboxes still contain their emails but can no longer send or receive emails. An ExpiredInboxRecord is created when an inbox and the email address and inbox ID are recorded. The expiresAt property is a timestamp string in ISO DateTime Format yyyy-MM-dd'T'HH:mm:ss.SSSXXX. (optional)
expires_in = 56 # int | Number of milliseconds that inbox should exist for (optional)
favourite = True # bool | Is the inbox a favorite. Marking an inbox as a favorite is typically done in the dashboard for quick access or filtering (optional)
inbox_type = 'inbox_type_example' # str | HTTP (default) or SMTP inbox type. HTTP inboxes are default and best solution for most cases. SMTP inboxes are more reliable for public inbound email consumption (but do not support sending emails). When using custom domains the domain type must match the inbox type. HTTP inboxes are processed by AWS SES while SMTP inboxes use a custom mail server running at `mx.mailslurp.com`. (optional)
name = 'name_example' # str | Optional name of the inbox. Displayed in the dashboard for easier search and used as the sender name when sending emails. (optional)
tags = ['tags_example'] # list[str] | Tags that inbox has been tagged with. Tags can be added to inboxes to group different inboxes within an account. You can also search for inboxes by tag in the dashboard UI. (optional)
use_domain_pool = True # bool | Use the MailSlurp domain name pool with this inbox when creating the email address. Defaults to null. If enabled the inbox will be an email address with a domain randomly chosen from a list of the MailSlurp domains. This is useful when the default `@mailslurp.com` email addresses used with inboxes are blocked or considered spam by a provider or receiving service. When domain pool is enabled an email address will be generated ending in `@mailslurp.{world,info,xyz,...}` . This means a TLD is randomly selecting from a list of `.biz`, `.info`, `.xyz` etc to add variance to the generated email addresses. When null or false MailSlurp uses the default behavior of `@mailslurp.com` or custom email address provided by the emailAddress field. Note this feature is only available for `HTTP` inbox types. (optional)

    try:
        # Create an inbox email address. An inbox has a real email address and can send and receive emails. Inboxes can be either `SMTP` or `HTTP` inboxes.
        api_response = api_instance.create_inbox(allow_team_access=allow_team_access, description=description, email_address=email_address, expires_at=expires_at, expires_in=expires_in, favourite=favourite, inbox_type=inbox_type, name=name, tags=tags, use_domain_pool=use_domain_pool)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->create_inbox: %sn" % e)

Parameters

NameTypeDescriptionNotes
allow_team_accessboolDEPRECATED (team access is always true). Grant team access to this inbox and the emails that belong to it for team members of your organization.[optional]
descriptionstrOptional description of the inbox for labelling purposes. Is shown in the dashboard and can be used with[optional]
email_addressstrA custom email address to use with the inbox. Defaults to null. When null MailSlurp will assign a random email address to the inbox such as 123@mailslurp.com. If you use the useDomainPool option when the email address is null it will generate an email address with a more varied domain ending such as 123@mailslurp.info or 123@mailslurp.biz. When a custom email address is provided the address is split into a domain and the domain is queried against your user. If you have created the domain in the MailSlurp dashboard and verified it you can use any email address that ends with the domain. Note domain types must match the inbox type - so SMTP inboxes will only work with SMTP type domains. Avoid SMTP inboxes if you need to send emails as they can only receive. Send an email to this address and the inbox will receive and store it for you. To retrieve the email use the Inbox and Email Controller endpoints with the inbox ID.[optional]
expires_atdatetimeOptional inbox expiration date. If null then this inbox is permanent and the emails in it won’t be deleted. If an expiration date is provided or is required by your plan the inbox will be closed when the expiration time is reached. Expired inboxes still contain their emails but can no longer send or receive emails. An ExpiredInboxRecord is created when an inbox and the email address and inbox ID are recorded. The expiresAt property is a timestamp string in ISO DateTime Format yyyy-MM-dd’T’HH:mm:ss.SSSXXX.[optional]
expires_inintNumber of milliseconds that inbox should exist for[optional]
favouriteboolIs the inbox a favorite. Marking an inbox as a favorite is typically done in the dashboard for quick access or filtering[optional]
inbox_typestrHTTP (default) or SMTP inbox type. HTTP inboxes are default and best solution for most cases. SMTP inboxes are more reliable for public inbound email consumption (but do not support sending emails). When using custom domains the domain type must match the inbox type. HTTP inboxes are processed by AWS SES while SMTP inboxes use a custom mail server running at mx.mailslurp.com.[optional]
namestrOptional name of the inbox. Displayed in the dashboard for easier search and used as the sender name when sending emails.[optional]
tags**list[str]**Tags that inbox has been tagged with. Tags can be added to inboxes to group different inboxes within an account. You can also search for inboxes by tag in the dashboard UI.[optional]
use_domain_poolboolUse the MailSlurp domain name pool with this inbox when creating the email address. Defaults to null. If enabled the inbox will be an email address with a domain randomly chosen from a list of the MailSlurp domains. This is useful when the default @mailslurp.com email addresses used with inboxes are blocked or considered spam by a provider or receiving service. When domain pool is enabled an email address will be generated ending in @mailslurp.{world,info,xyz,...} . This means a TLD is randomly selecting from a list of .biz, .info, .xyz etc to add variance to the generated email addresses. When null or false MailSlurp uses the default behavior of @mailslurp.com or custom email address provided by the emailAddress field. Note this feature is only available for HTTP inbox types.[optional]

Return type

Inbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

create_inbox_ruleset

InboxRulesetDto create_inbox_ruleset(inbox_id, create_inbox_ruleset_options)

Create an inbox ruleset

Create a new inbox rule for forwarding, blocking, and allowing emails when sending and receiving

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId
create_inbox_ruleset_options = mailslurp_client.CreateInboxRulesetOptions() # CreateInboxRulesetOptions | createInboxRulesetOptions

    try:
        # Create an inbox ruleset
        api_response = api_instance.create_inbox_ruleset(inbox_id, create_inbox_ruleset_options)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->create_inbox_ruleset: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId
create_inbox_ruleset_optionsCreateInboxRulesetOptionscreateInboxRulesetOptions

Return type

InboxRulesetDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

create_inbox_with_defaults

Inbox create_inbox_with_defaults()

Create an inbox with default options. Uses MailSlurp domain pool address and is private.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    
    try:
        # Create an inbox with default options. Uses MailSlurp domain pool address and is private.
        api_response = api_instance.create_inbox_with_defaults()
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->create_inbox_with_defaults: %sn" % e)

Parameters

This endpoint does not need any parameter.

Return type

Inbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

create_inbox_with_options

Inbox create_inbox_with_options(create_inbox_dto)

Create an inbox with options. Extended options for inbox creation.

Additional endpoint that allows inbox creation with request body options. Can be more flexible that other methods for some clients.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    create_inbox_dto = mailslurp_client.CreateInboxDto() # CreateInboxDto | createInboxDto

    try:
        # Create an inbox with options. Extended options for inbox creation.
        api_response = api_instance.create_inbox_with_options(create_inbox_dto)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->create_inbox_with_options: %sn" % e)

Parameters

NameTypeDescriptionNotes
create_inbox_dtoCreateInboxDtocreateInboxDto

Return type

Inbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

delete_all_inboxes

delete_all_inboxes()

Delete all inboxes

Permanently delete all inboxes and associated email addresses. This will also delete all emails within the inboxes. Be careful as inboxes cannot be recovered once deleted. Note: deleting inboxes will not impact your usage limits. Monthly inbox creation limits are based on how many inboxes were created in the last 30 days, not how many inboxes you currently have.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    
    try:
        # Delete all inboxes
        api_instance.delete_all_inboxes()
    except ApiException as e:
        print("Exception when calling InboxControllerApi->delete_all_inboxes: %sn" % e)

Parameters

This endpoint does not need any parameter.

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: Not defined

HTTP response details

Status codeDescriptionResponse headers
204No Content-
401Unauthorized-
403Forbidden-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

delete_inbox

delete_inbox(inbox_id)

Delete inbox

Permanently delete an inbox and associated email address as well as all emails within the given inbox. This action cannot be undone. Note: deleting an inbox will not affect your account usage. Monthly inbox usage is based on how many inboxes you create within 30 days, not how many exist at time of request.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId

    try:
        # Delete inbox
        api_instance.delete_inbox(inbox_id)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->delete_inbox: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: Not defined

HTTP response details

Status codeDescriptionResponse headers
204No Content-
401Unauthorized-
403Forbidden-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

does_inbox_exist

InboxExistsDto does_inbox_exist(email_address)

Does inbox exist

Check if inboxes exist by email address. Useful if you are sending emails to mailslurp addresses

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    email_address = 'email_address_example' # str | Email address

    try:
        # Does inbox exist
        api_response = api_instance.does_inbox_exist(email_address)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->does_inbox_exist: %sn" % e)

Parameters

NameTypeDescriptionNotes
email_addressstrEmail address

Return type

InboxExistsDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

flush_expired

FlushExpiredInboxesResult flush_expired(before=before)

Remove expired inboxes

Remove any expired inboxes for your account (instead of waiting for scheduled removal on server)

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    before = '2013-10-20T19:20:30+01:00' # datetime | Optional expired at before flag to flush expired inboxes that have expired before the given time (optional)

    try:
        # Remove expired inboxes
        api_response = api_instance.flush_expired(before=before)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->flush_expired: %sn" % e)

Parameters

NameTypeDescriptionNotes
beforedatetimeOptional expired at before flag to flush expired inboxes that have expired before the given time[optional]

Return type

FlushExpiredInboxesResult

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
204No Content-
401Unauthorized-
403Forbidden-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_all_inboxes

PageInboxProjection get_all_inboxes(before=before, favourite=favourite, page=page, search=search, since=since, size=size, sort=sort, tag=tag, team_access=team_access)

List All Inboxes Paginated

List inboxes in paginated form. The results are available on the content property of the returned object. This method allows for page (zero based), page size (how many results to return), and a sort direction (based on createdAt time). You Can also filter by whether an inbox is favorited or use email address pattern. This method is the recommended way to query inboxes. The alternative getInboxes method returns a full list of inboxes but is limited to 100 results.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created before given date time (optional)
favourite = False # bool | Optionally filter results for favourites only (optional) (default to False)
page = 0 # int | Optional page  in list pagination (optional) (default to 0)
search = 'search_example' # str | Optionally filter by search words partial matching ID, tags, name, and email address (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created after given date time (optional)
size = 20 # int | Optional page size in list pagination (optional) (default to 20)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')
tag = 'tag_example' # str | Optionally filter by tags. Will return inboxes that include given tags (optional)
team_access = False # bool | DEPRECATED. Optionally filter by team access. (optional) (default to False)

    try:
        # List All Inboxes Paginated
        api_response = api_instance.get_all_inboxes(before=before, favourite=favourite, page=page, search=search, since=since, size=size, sort=sort, tag=tag, team_access=team_access)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_all_inboxes: %sn" % e)

Parameters

NameTypeDescriptionNotes
beforedatetimeOptional filter by created before given date time[optional]
favouriteboolOptionally filter results for favourites only[optional] [default to False]
pageintOptional page in list pagination[optional] [default to 0]
searchstrOptionally filter by search words partial matching ID, tags, name, and email address[optional]
sincedatetimeOptional filter by created after given date time[optional]
sizeintOptional page size in list pagination[optional] [default to 20]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]
tagstrOptionally filter by tags. Will return inboxes that include given tags[optional]
team_accessboolDEPRECATED. Optionally filter by team access.[optional] [default to False]

Return type

PageInboxProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_emails

list[EmailPreview] get_emails(inbox_id, before=before, delay_timeout=delay_timeout, limit=limit, min_count=min_count, retry_timeout=retry_timeout, since=since, size=size, sort=sort, unread_only=unread_only)

Get emails in an Inbox. This method is not idempotent as it allows retries and waits if you want certain conditions to be met before returning. For simple listing and sorting of known emails use the email controller instead.

List emails that an inbox has received. Only emails that are sent to the inbox’s email address will appear in the inbox. It may take several seconds for any email you send to an inbox’s email address to appear in the inbox. To make this endpoint wait for a minimum number of emails use the minCount parameter. The server will retry the inbox database until the minCount is satisfied or the retryTimeout is reached

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | Id of inbox that emails belongs to
before = '2013-10-20T19:20:30+01:00' # datetime | Exclude emails received after this ISO 8601 date time (optional)
delay_timeout = 56 # int | delayTimeout (optional)
limit = 56 # int | Limit the result set, ordered by received date time sort direction. Maximum 100. For more listing options see the email controller (optional)
min_count = 56 # int | Minimum acceptable email count. Will cause request to hang (and retry) until minCount is satisfied or retryTimeout is reached. (optional)
retry_timeout = 56 # int | Maximum milliseconds to spend retrying inbox database until minCount emails are returned (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Exclude emails received before this ISO 8601 date time (optional)
size = 56 # int | Alias for limit. Assessed first before assessing any passed limit. (optional)
sort = 'sort_example' # str | Sort the results by received date and direction ASC or DESC (optional)
unread_only = True # bool | unreadOnly (optional)

    try:
        # Get emails in an Inbox. This method is not idempotent as it allows retries and waits if you want certain conditions to be met before returning. For simple listing and sorting of known emails use the email controller instead.
        api_response = api_instance.get_emails(inbox_id, before=before, delay_timeout=delay_timeout, limit=limit, min_count=min_count, retry_timeout=retry_timeout, since=since, size=size, sort=sort, unread_only=unread_only)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_emails: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrId of inbox that emails belongs to
beforedatetimeExclude emails received after this ISO 8601 date time[optional]
delay_timeoutintdelayTimeout[optional]
limitintLimit the result set, ordered by received date time sort direction. Maximum 100. For more listing options see the email controller[optional]
min_countintMinimum acceptable email count. Will cause request to hang (and retry) until minCount is satisfied or retryTimeout is reached.[optional]
retry_timeoutintMaximum milliseconds to spend retrying inbox database until minCount emails are returned[optional]
sincedatetimeExclude emails received before this ISO 8601 date time[optional]
sizeintAlias for limit. Assessed first before assessing any passed limit.[optional]
sortstrSort the results by received date and direction ASC or DESC[optional]
unread_onlyboolunreadOnly[optional]

Return type

**list[EmailPreview]**

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inbox

Inbox get_inbox(inbox_id)

Get Inbox. Returns properties of an inbox.

Returns an inbox’s properties, including its email address and ID.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId

    try:
        # Get Inbox. Returns properties of an inbox.
        api_response = api_instance.get_inbox(inbox_id)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inbox: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId

Return type

Inbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inbox_count

CountDto get_inbox_count()

Get total inbox count

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    
    try:
        # Get total inbox count
        api_response = api_instance.get_inbox_count()
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inbox_count: %sn" % e)

Parameters

This endpoint does not need any parameter.

Return type

CountDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inbox_email_count

CountDto get_inbox_email_count(inbox_id)

Get email count in inbox

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | Id of inbox that emails belongs to

    try:
        # Get email count in inbox
        api_response = api_instance.get_inbox_email_count(inbox_id)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inbox_email_count: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrId of inbox that emails belongs to

Return type

CountDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inbox_emails_paginated

PageEmailPreview get_inbox_emails_paginated(inbox_id, before=before, page=page, since=since, size=size, sort=sort)

Get inbox emails paginated

Get a paginated list of emails in an inbox. Does not hold connections open.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | Id of inbox that emails belongs to
before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by received before given date time (optional)
page = 0 # int | Optional page  in inbox emails list pagination (optional) (default to 0)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by received after given date time (optional)
size = 20 # int | Optional page size in inbox emails list pagination (optional) (default to 20)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')

    try:
        # Get inbox emails paginated
        api_response = api_instance.get_inbox_emails_paginated(inbox_id, before=before, page=page, since=since, size=size, sort=sort)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inbox_emails_paginated: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrId of inbox that emails belongs to
beforedatetimeOptional filter by received before given date time[optional]
pageintOptional page in inbox emails list pagination[optional] [default to 0]
sincedatetimeOptional filter by received after given date time[optional]
sizeintOptional page size in inbox emails list pagination[optional] [default to 20]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

PageEmailPreview

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inbox_sent_emails

PageSentEmailProjection get_inbox_sent_emails(inbox_id, before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)

Get Inbox Sent Emails

Returns an inbox’s sent email receipts. Call individual sent email endpoints for more details. Note for privacy reasons the full body of sent emails is never stored. An MD5 hash hex is available for comparison instead.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId
before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by sent before given date time (optional)
page = 0 # int | Optional page  in inbox sent email list pagination (optional) (default to 0)
search_filter = 'search_filter_example' # str | Optional sent email search (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by sent after given date time (optional)
size = 20 # int | Optional page size in inbox sent email list pagination (optional) (default to 20)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')

    try:
        # Get Inbox Sent Emails
        api_response = api_instance.get_inbox_sent_emails(inbox_id, before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inbox_sent_emails: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId
beforedatetimeOptional filter by sent before given date time[optional]
pageintOptional page in inbox sent email list pagination[optional] [default to 0]
search_filterstrOptional sent email search[optional]
sincedatetimeOptional filter by sent after given date time[optional]
sizeintOptional page size in inbox sent email list pagination[optional] [default to 20]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

PageSentEmailProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inbox_tags

list[str] get_inbox_tags()

Get inbox tags

Get all inbox tags

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    
    try:
        # Get inbox tags
        api_response = api_instance.get_inbox_tags()
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inbox_tags: %sn" % e)

Parameters

This endpoint does not need any parameter.

Return type

list[str]

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_inboxes

list[Inbox] get_inboxes(before=before, since=since, size=size, sort=sort)

List Inboxes and email addresses

List the inboxes you have created. Note use of the more advanced getAllEmails is recommended and allows paginated access using a limit and sort parameter.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created before given date time (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created after given date time (optional)
size = 100 # int | Optional result size limit. Note an automatic limit of 100 results is applied. See the paginated `getAllEmails` for larger queries. (optional) (default to 100)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')

    try:
        # List Inboxes and email addresses
        api_response = api_instance.get_inboxes(before=before, since=since, size=size, sort=sort)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_inboxes: %sn" % e)

Parameters

NameTypeDescriptionNotes
beforedatetimeOptional filter by created before given date time[optional]
sincedatetimeOptional filter by created after given date time[optional]
sizeintOptional result size limit. Note an automatic limit of 100 results is applied. See the paginated getAllEmails for larger queries.[optional] [default to 100]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

**list[Inbox]**

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

get_organization_inboxes

PageOrganizationInboxProjection get_organization_inboxes(before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)

List Organization Inboxes Paginated

List organization inboxes in paginated form. These are inboxes created with allowTeamAccess flag enabled. Organization inboxes are readOnly for non-admin users. The results are available on the content property of the returned object. This method allows for page (zero based), page size (how many results to return), and a sort direction (based on createdAt time).

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created before given date time (optional)
page = 0 # int | Optional page  in list pagination (optional) (default to 0)
search_filter = 'search_filter_example' # str | Optional search filter (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created after given date time (optional)
size = 20 # int | Optional page size in list pagination (optional) (default to 20)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')

    try:
        # List Organization Inboxes Paginated
        api_response = api_instance.get_organization_inboxes(before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->get_organization_inboxes: %sn" % e)

Parameters

NameTypeDescriptionNotes
beforedatetimeOptional filter by created before given date time[optional]
pageintOptional page in list pagination[optional] [default to 0]
search_filterstrOptional search filter[optional]
sincedatetimeOptional filter by created after given date time[optional]
sizeintOptional page size in list pagination[optional] [default to 20]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

PageOrganizationInboxProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

list_inbox_rulesets

PageInboxRulesetDto list_inbox_rulesets(inbox_id, before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)

List inbox rulesets

List all rulesets attached to an inbox

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId
before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created before given date time (optional)
page = 0 # int | Optional page  in inbox ruleset list pagination (optional) (default to 0)
search_filter = 'search_filter_example' # str | Optional search filter (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created after given date time (optional)
size = 20 # int | Optional page size in inbox ruleset list pagination (optional) (default to 20)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')

    try:
        # List inbox rulesets
        api_response = api_instance.list_inbox_rulesets(inbox_id, before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->list_inbox_rulesets: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId
beforedatetimeOptional filter by created before given date time[optional]
pageintOptional page in inbox ruleset list pagination[optional] [default to 0]
search_filterstrOptional search filter[optional]
sincedatetimeOptional filter by created after given date time[optional]
sizeintOptional page size in inbox ruleset list pagination[optional] [default to 20]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

PageInboxRulesetDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

list_inbox_tracking_pixels

PageTrackingPixelProjection list_inbox_tracking_pixels(inbox_id, before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)

List inbox tracking pixels

List all tracking pixels sent from an inbox

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId
before = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created before given date time (optional)
page = 0 # int | Optional page  in inbox tracking pixel list pagination (optional) (default to 0)
search_filter = 'search_filter_example' # str | Optional search filter (optional)
since = '2013-10-20T19:20:30+01:00' # datetime | Optional filter by created after given date time (optional)
size = 20 # int | Optional page size in inbox tracking pixel list pagination (optional) (default to 20)
sort = 'ASC' # str | Optional createdAt sort direction ASC or DESC (optional) (default to 'ASC')

    try:
        # List inbox tracking pixels
        api_response = api_instance.list_inbox_tracking_pixels(inbox_id, before=before, page=page, search_filter=search_filter, since=since, size=size, sort=sort)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->list_inbox_tracking_pixels: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId
beforedatetimeOptional filter by created before given date time[optional]
pageintOptional page in inbox tracking pixel list pagination[optional] [default to 0]
search_filterstrOptional search filter[optional]
sincedatetimeOptional filter by created after given date time[optional]
sizeintOptional page size in inbox tracking pixel list pagination[optional] [default to 20]
sortstrOptional createdAt sort direction ASC or DESC[optional] [default to ‘ASC’]

Return type

PageTrackingPixelProjection

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

send_email

send_email(inbox_id, send_email_options=send_email_options)

Send Email

Send an email from an inbox’s email address. The request body should contain the SendEmailOptions that include recipients, attachments, body etc. See SendEmailOptions for all available properties. Note the inboxId refers to the inbox’s id not the inbox’s email address. See https://www.mailslurp.com/guides/ for more information on how to send emails. This method does not return a sent email entity due to legacy reasons. To send and get a sent email as returned response use the sister method sendEmailAndConfirm.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | ID of the inbox you want to send the email from
send_email_options = mailslurp_client.SendEmailOptions() # SendEmailOptions | Options for the email (optional)

    try:
        # Send Email
        api_instance.send_email(inbox_id, send_email_options=send_email_options)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->send_email: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrID of the inbox you want to send the email from
send_email_optionsSendEmailOptionsOptions for the email[optional]

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: Not defined

HTTP response details

Status codeDescriptionResponse headers
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

send_email_and_confirm

SentEmailDto send_email_and_confirm(inbox_id, send_email_options=send_email_options)

Send email and return sent confirmation

Sister method for standard sendEmail method with the benefit of returning a SentEmail entity confirming the successful sending of the email with a link to the sent object created for it.

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | ID of the inbox you want to send the email from
send_email_options = mailslurp_client.SendEmailOptions() # SendEmailOptions | Options for the email (optional)

    try:
        # Send email and return sent confirmation
        api_response = api_instance.send_email_and_confirm(inbox_id, send_email_options=send_email_options)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->send_email_and_confirm: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrID of the inbox you want to send the email from
send_email_optionsSendEmailOptionsOptions for the email[optional]

Return type

SentEmailDto

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

send_test_email

send_test_email(inbox_id)

Send a test email to inbox

Send an inbox a test email to test email receiving is working

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId

    try:
        # Send a test email to inbox
        api_instance.send_test_email(inbox_id)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->send_test_email: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId

Return type

void (empty response body)

Authorization

API_KEY

HTTP request headers

  • Content-Type: Not defined
  • Accept: Not defined

HTTP response details

Status codeDescriptionResponse headers
201Created-
204No Content-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

set_inbox_favourited

Inbox set_inbox_favourited(inbox_id, set_inbox_favourited_options)

Set inbox favourited state

Set and return new favourite state for an inbox

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId
set_inbox_favourited_options = mailslurp_client.SetInboxFavouritedOptions() # SetInboxFavouritedOptions | setInboxFavouritedOptions

    try:
        # Set inbox favourited state
        api_response = api_instance.set_inbox_favourited(inbox_id, set_inbox_favourited_options)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->set_inbox_favourited: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId
set_inbox_favourited_optionsSetInboxFavouritedOptionssetInboxFavouritedOptions

Return type

Inbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
201Created-
401Unauthorized-
403Forbidden-
404Not Found-

[Back to top] [Back to API list] [Back to Model list] [Back to ]

update_inbox

Inbox update_inbox(inbox_id, update_inbox_options)

Update Inbox. Change name and description. Email address is not editable.

Update editable fields on an inbox

Example

  • Api Key Authentication (API_KEY):
from __future__ import print_function
import time
import mailslurp_client
from mailslurp_client.rest import ApiException
from pprint import pprint
# Defining the host is optional and defaults to https://api.mailslurp.com
# See configuration.py for a list of all supported configuration parameters.
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com"
)

# The client must configure the authentication and authorization parameters
# in accordance with the API server security policy.
# Examples for each auth method are provided below, use the example that
# satisfies your auth use case.

# Configure API key authorization: API_KEY
configuration = mailslurp_client.Configuration(
    host = "https://api.mailslurp.com",
    api_key = {
        'x-api-key': 'YOUR_API_KEY'
    }
)
# Uncomment below to setup prefix (e.g. Bearer) for API key, if needed
# configuration.api_key_prefix['x-api-key'] = 'Bearer'

# Enter a context with an instance of the API client
with mailslurp_client.ApiClient(configuration) as api_client:
    # Create an instance of the API class
    api_instance = mailslurp_client.InboxControllerApi(api_client)
    inbox_id = 'inbox_id_example' # str | inboxId
update_inbox_options = mailslurp_client.UpdateInboxOptions() # UpdateInboxOptions | updateInboxOptions

    try:
        # Update Inbox. Change name and description. Email address is not editable.
        api_response = api_instance.update_inbox(inbox_id, update_inbox_options)
        pprint(api_response)
    except ApiException as e:
        print("Exception when calling InboxControllerApi->update_inbox: %sn" % e)

Parameters

NameTypeDescriptionNotes
inbox_idstrinboxId
update_inbox_optionsUpdateInboxOptionsupdateInboxOptions

Return type

Inbox

Authorization

API_KEY

HTTP request headers

  • Content-Type: application/json
  • Accept: application/json

HTTP response details

Status codeDescriptionResponse headers
200OK-
204No Content-
401Unauthorized-
403Forbidden-

[Back to top] [Back to API list] [Back to Model list] [Back to ]